检测项目（部分）
异味
pH值
使用说明
耐皂洗色牢度
耐干洗色牢度
外观质量
阴燃燃烧
耐汗渍色牢度
明火燃烧
面料断裂强力
耐水色牢度
工艺质量
耐光色牢度
基本要求
部分项目
甲醛含量
燃烧性能
床围固定位置
纤维含量
耐唾液色牢度
可分解芳香胺染料
断裂强力
缝纫质量
水洗尺寸变化率
织物起球性能
重金属中总铅和总镉
耐热压色牢度
标志
全部参数
絮用纤维
检测样品（部分）
配套床上用品
拉舍尔床上用品
机织婴幼儿床上用品
床上用品
家具及床上用品
丝绸床上用品
亚麻床上用品
凉感面料床上用品
床上用品用针织面料
检测标准（部分）
本部分适用于放置在床垫上的床上用品，例如：
——床垫罩；
——衬布；
——护理单和护理垫；
——床单；
——毯子；
——电热毯；
——被子和被套；
——枕头（不考虑填充物的材质）和长枕；
——枕头套。
本部分不适用于床垫、床基和褥垫。
本部分适用于床垫上的床上用品，例如：
——床垫罩；
——衬布；
——护理单和护理垫；
——床单；
——毯子；
——电热毯；
——被子和被套；
——枕头（不考虑填充物的材质）和长枕；
——枕头套。
本部分不适用于床垫、床基和褥垫。
本文件适用于以纺织织物为面、里料，以絮用纤维为填充物或无填充物生产的床上用品。其他产品可参照执行。
本文件不适用于羽绒羽毛、蚕丝为填充物的产品。
本文件不适用于年龄在36个月及以下的婴幼儿床上用品。
本标准适用于评定涤纶长丝床上用品机织物的品质。
本标准不适用于涂料印染加工产品。
本标准适用于以蚕丝纯织、蚕丝与其他纱线交织、或与其他纤维混纺（蚕丝含量30％及以上）丝织物为面料加工制成的丝绸床上用品，不包括毯类、芯类、席类产品。
本标准不适用于婴幼儿及儿童用品。
本标准适用于鉴定床上用品用针织面料的品质。
1.1 This practice covers the procedures for estimating emission profiles of volatile organic chemicals (VOCs) from bedding sets when a new bedding set is first brought into a house based on emissions testing in environmental chambers.
1.2 Emission profiles from bedding sets are determined from air concentrations measured in environmental chambers.
1.3 VOC emissions from bedding sets as in the case of other household furnishings usually are highest when the products are new. Procedures described in this practice also are applicable to used bedding sets.
1.4 The practice is applicable to VOCs and not to semi-volatile organic chemicals or nonvolatile organic chemicals.
1.5 This practice summarizes procedures for sample selection and handling. This practice also refers to pertinent sampling procedures and analytical methods for emission testing but does not include technical details on selection of appropriate collection media and analytical methods or on sampling and analytical equipment and associated procedures.
1.6 Emission profiles based on this practice may be used for estimating human exposures to VOCs.
1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
The objective of this guide is to describe procedures and data sources for conducting risk characterization of acute inhalation exposure to chemicals emitted from bedding sets. Risk characterization can be used to identify chemical(s) that pose potentially significant human health risks for the scenario(s) and population(s) selected for exposure assessment. Such identification of chemicals can help in identifying the components or materials used in manufacture of bedding sets that should be further examined. Risk characterization also includes an assessment of potential odor problems for any individual chemical emitted by the bedding set.
1.1 This guide provides guidance to individuals and organizations for conducting risk characterization of exposure to volatile organic chemicals (VOCs) emitted from bedding sets or an ensemble of a mattress and supporting box spring.
1.2 This guide is for risk characterization of short-term exposures to a new bedding set brought into a residential indoor environment. The risk characterization considerations presented in this guide are applicable to both the general population and sensitive subgroups such as convalescing adults.
1.3 The risk characterization addressed in this guide is limited to acute health and irritation effects resulting from short-term exposure to VOCs in indoor air. Although certain procedures described in this guide may be applicable to assessing long-term exposure the guide does not address cancer and other chronic health effects.
1.4 VOC emissions from bedding sets as in the case of other household furnishings usually are highest when the products are new. A used bedding set may also emit VOCs either from the original materials or as a result of its use. The procedures presented in this guide also are applicable to used bedding sets.
1.5 Risk characterization procedures described in this guide should be carried out under the supervision of a qualified toxicologist or risk assessment specialist or both.
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7 This standard does not purport to address all of the safety concerns if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use.
检测优势
检测资质（部分）
检测实验室（部分）
合作客户（部分）
检测报告作用
1、可以帮助生产商识别产品的潜在问题或缺陷，并及时改进生产工艺，保障产品的品质和安全性。
2、可以为生产商提供科学的数据，证明其产品符合国际、国家和地区相关标准和规定，从而增强产品的市场竞争力。
3、可以评估产品的质量和安全性，确保产品能够达到预期效果，同时减少潜在的健康和安全风险。
4、可以帮助生产商构建品牌形象，提高品牌信誉度，并促进产品的销售和市场推广。
5、可以确定性能和特性以及元素，例如力学性能、化学性质、物理性能、热学性能等，从而为产品设计、制造和使用提供参考。
6、可以评估产品是否含有有毒有害成分，以及是否符合环保要求，从而保障产品的安全性。
检测流程
1、中析研究所接受客户委托，为客户提供检测服务
2、客户可选择寄送样品或由我们的工程师进行采样，以确保样品的准确性和可靠性。
3、我们的工程师会对样品进行初步评估，并提供报价，以便客户了解检测成本。
4、双方将就检测项目进行详细沟通，并签署保密协议，以保证客户信息的保密性。在此基础上，我们将进行测试试验.
5、在检测过程中，我们将与客户进行密切沟通，以便随时调整测试方案，确保测试进度。
6、试验测试通常在7-15个工作日内完成，具体时间根据样品的类型和数量而定。
7、出具检测样品报告，以便客户了解测试结果和检测数据，为客户提供有力的支持和帮助。
以上为床上用品检测的检测内容，如需更多内容以及服务请联系在线工程师。
